Smart IR Remote Control Smart Home Automation Work with Alexa and Google Home Universal Inferred Smart IR TUYA Wireless Remote Controller All in One IR Blaster Control

Description

1:Add the device:Open the app to the "My Home" page and click on "AddDevice"；Select "Remote Controller" in the "Device List" and addby following prompts； Network Reset（Default mode）Press and hold the reset button for more than 5s until thenetwork indicator flashes. Follow the APP instructions toadd device; Go to the "Add Device" page and click the "Confirm indicator is flashing" button; enter WI-FI password; Connect the device (the device cannot be interrupted when connected), click "End"Into the "button after the device is successfully added; The device can be found in the My Home list once thedevice has been successfully added. 2.Add a fixed remote control Adding fixed-class electrcal remote control such as airconditioning remote control, TV remote control, set-top box remote control, etc，based on the existing classification, this method of adding remote control is simple and fast, but limited by the code database data. It can not guarantee that the electrical appliance can be 100% controlled by the infrared remote control，The appliance may not be able to support control. 3.Net work reset (Compatibility mode) Press and hold the reset button for more than 5s, the indicator light flashes blue and enter the flashing state; press and hold the reset button for more than 5s to enter the slow flash mode, and follow the APP instructions to add equipment 4.DIY Function If you can't find the remote control for controlling the appliance through the above two methods, you can use the learning function（DIY）to get the smart remote control abilityto control the appliance. 5.When the infrared is emitted, the indicator light flashes toindicate normal operation. The infrared launch tube is in the area above the indicatorlight. Please point the device remote control 3cm away atthe indicator area when learning (DIY). When learning (DIY), the indicator light is al ways on, the indicator light is off when the detection signal is successful.