Simlug Fluid Transfer Oil Extraction Pump For Hydraulic Oil, Liquid

Description

products description:This oil extractor transfer pump uses 12v mini self-priming pump to exchange car engine oil. It works by connecting the clamps to the 12V car-battery,and widely used in general industrial equipment, cause this pump can pump oil not only, also can pump hydraulic oil and other liquid. It is an ideal equipment for quick and clean oil-changes. Features: 1. Widely used in general industrial equipment.2. It works by connecting the clamps to the 12V car-battery.3. An ideal equipment for quick and clean oil-changes. 4. Simple on/off power switch, easy to use.Spezifikations:Rated Voltage: DC 12VRated Power: 60WMaximum Pressure: Max. 0.8MPAMaximum Flow: 5L/minPump Diameter: Approx. 4.8cm / 1.89Length: Approx. 14.5cm / 5.7Outlet Pipe Size(Dia.*L): Approx. 11mm*140cm / 0.43 * 55Inlet Pipe Diameter: Approx. 8mm & 6 mm / 0.31 & 0.24Inlet Pipe Length: Approx. 100cm / 39.37Cable Length: Approx. 30cm / 11.8Clips Length: Approx. 8cm / 3.15Main Color: BlackApplication: Widely used in general industrial equipment, equipment, chemical equipment, shipbuilding, drinks, carpet and floor cleaning, water purification and water treatment equipment, vehicle cleaning, agricultural spraying, zo pipeline pressure, air cleaning cooling, coal and metallurgical industriesHow to use:1. Start to run the car engine for a while, when oil temperature turns to be about 50 degrees, start pumping oil.2. Connect the pump to the power, run it for a while, and observe whether the inlet and outlet is normal.3. Open the filler cap,get dipstick out, force the tube into the bottom of the joint, until the tube does not move; then put the inl