TEN-HIGH 60W Laser Power Supply for CO2 Laser Engraver Cutter

Description

Size Name:60W  |  Colour Name:Standard Version Feature: 1.The power supply has TTL signal indication, water through signal indication and laser output indication. 2.This power supply has the button to test output laser manually. 3.Application: Engrave and cut acrylic, fabric, double color sheet and rubber, etc. How to conne connect the laser power with co2 laser tube: 1.The high voltage (HV+) of the power supply must be connected to the anode (total reflection end) of the CO2 laser tube; 2.The negative of the power supply is connected to the cathode (laser output) of the CO2 laser tube via an ammeter (or directly). How to check whether the power supply is normal: When the power supply and the laser tube are connected correctly, the control line is removed. Press the 'TEST' test button. If the LASER lamp is on, the laser tube does not emit laser light, then the laser tube is broken; if the laser tube outputs laser, the laser power supply is normal; if the LASER lamp is not lit, the laser power supply is broken.